News

  • Do you know these advantages of three-phase asynchronous vibration motor?

    The three-phase asynchronous vibration motor is an exciting source which combines the power source with the vibration source. The three-phase asynchronous vibration motor is a set of adjustable eccentric blocks installed at each end of the rotor shaft. The exciting force is obtained by using the ...
    Kara karantawa
  • Bearing life of vibration motor is not affected by axial load

    When the vibration motor disassembles the bearing, bearing of vibration motor should choose heavy bearing, can carry inevitable axial load, regardless of device bias, bearing is not affected by axial load, When the vibration motor disassembles the bearing, it should record the position of the pai...
    Kara karantawa
  • How to solve the heating problem of vibration motor

    In practice, with the increase of bearing temperature in the vibration motor, the viscosity of the lubricating grease decreases gradually, the spindle of the vibration motor rotates at high speed, and the lubricating grease in the labyrinth cover leaks continuously from the labyrinth cover, good....
    Kara karantawa
  • What are the protective measures for vibration motor?

    Like all mechanical equipment, vibration motor is the vibration source of vibration equipment, normal maintenance of vibration motor plays a vital role in normal use, in particular, the timely addition and replacement of normal lubricating oil can effectively improve the service life of high-freq...
    Kara karantawa
  • What do you know about the cause of motor vibration?

    Vibration is the source of noise. The vibration of motor is different from that of traditional engine, and the principle is also different. Vibration control should be based on the understanding of the characteristics of the motor itself. Next, we would like to introduce the technical staff of Xi...
    Kara karantawa
  • Motor protection fuse, thermal relay why can not ensure that the vibration motor does not burn out?

    The main reason for the burn-out of the vibration motor is that due to the particularity of the structure of the vibration motor itself, the exciting force generated by the eccentric blocks at both ends of the motor will impact the anchor bolts 2,000 times per minute, and because of the vibration...
    Kara karantawa
  • Disadvantages of long-term use in winter

    Due to the fact that some mineral materials are mostly powdered ore, the temperature is relatively low in winter, and the weather is changeable, the humidity of the powdered ore is large, and it is easy to block the materials, especially in the rainy season, during the course of cutting, the vibr...
    Kara karantawa
  • Damage caused by excessive current of vibration motor

    Vibration Motor current can also cause a lot of bad phenomenon, vibration motor current is too high to cause product burn-out is a regular occurrence, so we also need to prevent vibration motor current is too high. The reason of the high current of vibration motor is analyzed comprehensively, inc...
    Kara karantawa
  • HBGK-20 vibration motor test video

    https://www.vibratemotor.com/uploads/af6d5dec922d43487c23d2a73c85258a.mp4
    Kara karantawa
  • Application and movement form of vibration motor

    Vibration Motor can produce circular, elliptical, linear, complex motion mode. Vibration machinery equipment has always used vibration motor as a simple, reliable and effective power. Different installation and combination forms of vibration motor on vibration machine body can produce different v...
    Kara karantawa
  • Vibration motors usually operate in dusty and harsh environments

    The vibration motor usually runs in the environment with big dust and bad environment, and the main body of the vibrating motor has no fan. Therefore, we must pay attention to the cooling work. The seven main points of maintenance are: 1. Current is normal, abnormal please stop checking. Vibratio...
    Kara karantawa
  • Vibration motors are to be used in a strict manner

    Vibration Motor use we also need to be in accordance with the strict operation mode, not in accordance with the strict operation mode will also lead to reduce the life of vibration motor.     The outlet cable of the vibration motor bears the vibration, so the cable with greater elasticity should ...
    Kara karantawa
1234Next> >> Page 1 / 4